Canopies
Easily transportable, lightweight tents for do-it-yourself installations, party canopies require ropes and stakes for stability, and are suited for use on lawns only. Not recommended when extreme weather conditions are anticipated.
Available in: 20'x20', 20'x30', 20'x40'
Canopy Installation Instructions:
Step 1: Layout at Site
Lay out Canopy as shown below to exact desired position. Assemble 2-piece side poles and lay straight out from each pole hole in tent top. Drive the stake one foot from the end of each pole. Attach ropes loosely to stakes.
Step 2: Raise Side Poles
Insert side poles into pole holes and raise so that bottom of poles slant toward center of tent. Tighten guy rope. Continue with other two corners.
Step 3: Raise Center Pole
Assemble 3-piece center pole and insert into center pole hole. (20'x30' canopies will have 2 center poles.) Raise to upright position and tie off jump rope.
Step 4: Side Pole Adjustment
Tighten guy ropes and then set side poles to upright position. Adjust pole positions and guy rope tensions to properly tighten tent, eliminating sags in top.
|